AirLink LX60 Series Hardware User Guide
RS485
SIM Card Interface
•
•
Mechanical Specifications
For mechanical drawings, dimensions, and weight, see
page 55.
•
•
Screw Torque Settings
•
•
Rev. 2 June 2021
Carried by Pins 2 and 6 of the I/O connector.
•
RS485 is disabled by default
•
Supports up to 115.2 Kbps (half-duplex)
•
Default startup mode is Normal (AT command), with UDP PAD and TCP
•
PAD modes available
Termination resistor can be enabled/disabled in ACEmanager
•
Figure 3-2: Aux I/O Port
Table 3-2: I/O Connector Pin-out for RS485
RS485_A
RS485_B
The LX60 has one 6-pin SIM socket for a mini-SIM (2FF) SIM card, operated at 1.8 V/
3.3 V.
This interface is compliant with the applicable 3GPP standards for USIM.
Housing—The LX60 is made of rugged injection-molded plastic.
RoHS2—The LX60 complies with the Restriction of Hazardous Substances Directive
2011/65/EU (RoHS2). This directive restricts the use of hazardous materials in the
manufacture of various types of electronic and electrical equipment.
Mount screws: 1.1 N-m (10 in-lb)
Antennas: Finger tight (5–7 in-lb) is sufficient. The max torque should not go beyond
1.1 N-m (10 in-lb).
6
2
Name
Pin
Description
6
Non-inverting
2
Inverting
42
Mechanical Specifications
on
41111782