Daikin Sky Air Advance RZA200D7Y1B Service Manual page 99

To install the main PCB
RZA200+250D7Y1B
Sky Air Advance-series
ESIE19-13A – 2020.05
b
b
b
a Bridge connector X1A
b Main PCB support
c Main PCB
2 Unplug the bridge connector X1A and keep it for reuse.
3 Carefully pull the main PCB and unlatch the main PCB supports one by one
using a small pliers.
4 Remove the main PCB from the unit.
5 To install the main PCB, see
1 Install the main PCB on its mounting plate in the correct location.
2 Connect all connectors to the main PCB.
b
b
b
a Bridge connector X1A
b Main PCB support
c Main PCB
INFORMATION
Use the wiring diagram and connection diagram for correct installation of the
connectors, see
a b c
b
"3.9.2 Repair procedures" [
a b c
b
4
"6.2 Wiring diagram" [ 151].
3 Components
|
b
b
b
4 98].
b
b
b
Service manual
99