Installer Checklist - Lennox iComfort M30 Installation And Setup Manual

Installer Checklist

Item Description
1
Is the thermostat properly mounted to either a wall stud or wall? (Do not mount
on exterior wall or near any ventilation outputs, doorways or location that could
be directly exposed to sunlight)
2 Are all terminals wiring properly connected and tight?
3 When required, is the outdoor air temperature sensor (OATS) properly connected
and isolated when used? Is the input enabled using the user interface? Go to
advanced settings > outdoor sensor and set to YES if not done so already.
Then go to settings > display and make sure the outdoor temperature display
setting is configured for sensor. If OATS is not used, leave the setting on Internet.
4
Have all the Thermostat Features been explained to the Home Owner?
5 Has User manual been given to Home Owner?
6 Has additional Alexa information not in user manual been given to Home Owner
and shown where to find answers to additional questions?
Go to www.myicomfort.com Support page & FAQ.
7
Is the Wi-Fi connected?
8 Can the homeowner access the consumer portal (www.myicomfort.com) from
either a PC or tablet?
9
Has the homeowner downloaded the Lennox Thermostat application from either
Google Play or IOS App Store to their mobile devices?
10 Is the Lennox Dealer account number or your main shop phone number been
added to the dealer information screen? This will tie the homeowners system to
your LennoxPROS account.
Table 14. Installation Checklist
47
Yes No