Stage Control - Lennox iComfort M30 Installation And Setup Manual

Parameter Name
Offset

Stage Control

The following figures list typical configurations.
H/C
Stages
Locked =
NO
H/C
Stages
Locked =
YES
POINTS: SP -1.5
Table 6. Parameter Descriptions
Definition
There are two options for offset which are:
• Temperature offset can be used to offset the displayed space temperature by up to +/- 5 degrees. The
default temperature offset is zero. This offset also applies to the control temperature.
• Humidity offset can be used to offset the displayed room humidity by up to +/- 10%, the default offset is
0.
1st stage
OFF
2nd stage
1st stage
OFF
2nd stage
OFF
SP -1.0 SP -0.5
Figure 2. Cooling - 1 or 2 stages
1st stage
ON
Stg1 Differential
OFF
1st stage
ON
Stg1 Differential
S P + 0 5 .
SP
26
2nd stage
ON
Stg2 Differential
2nd stage
ON
Stg2 Differential
SP +1.0 SP +1.5 S P + 2 0 .