Removing/Installing The Walking Beam; Replacing The Side Frame - Invacare Pronto M71 Service Manual

All manuals and user guides at all-guides.com
SECTION 8—SHROUDS/FRAME

Removing/Installing the Walking Beam

NOTE: To remove the walking beam, follow steps 1-9 of Disassembling/Reassembling the Side
Frame Assembly on page 76.
NOTE: To install the walking beam, reverse steps 1-9 of Disassembling/Reassembling the Side
Frame Assembly on page 76.

Replacing the Side Frame

NOTE: To disassemble the side frame assembly and replace the side frame, follow steps 1-12 of
Disassembling/Reassembling the Side Frame Assembly on page 76.
NOTE: To install a new side frame and reassemble the side frame assembly, reverse steps 1-12 of
Disassembling/Reassembling the Side Frame Assembly on page 76.
Upper Mounting Pin
Side Frame
Washers
Nylon Spacer
Washers
Nylon Spacer
Reinforcement Plate
Lower Mounting Pin
Bolt
Locknuts
Walking Beam
Nylon Bushings
Pivot Tube
FIGURE 8.2 Disassembling/Reassembling the Side Frame Assembly
77
Part No 1118377 Pronto® M71™