Invacare Pronto M71 Service Manual page 65

5. Insert the hub into the inner rim and align the four mounting holes of the hub, inner
rim and outer rim.
6. Using the four mounting screws, lock washers and hex nuts, secure the outer rim to
the inner rim and hub. Torque hex nuts to 160 - 200-inch-lbs.
7. If pneumatic, fill tire to correct air pressure as noted on tire side wall.
Mounting Screws
FIGURE 6.6 Replacing the 2-Piece Wheel Rim and/or the Foam Filled or Pneumatic Tires
Part No 1118377
All manuals and user guides at all-guides.com
Inner Rim
Outer Rim
Washers
Wheel Hub Cutout
Tire
65
SECTION 6—WHEELS
Locknuts
Hub
Pronto® M71™