Invacare Pronto M71 Service Manual page 32

SECTION 4—SEAT ASSEMBLY
2. Remove the mounting screw and locknut that secure the adjustable height tube to the
support tube.
3. Adjust tube to desired mounting position. Refer to Table: Available Mounting Holes
on page 32 for available mounting positions.
4. Reinstall mounting screw and locknut. Securely tighten.
5. Repeat STEPS 2-4 for the three remaining adjustable height tubes.
6. Reinstall the seat assembly. Refer to Removing/Installing the Seat Assembly on
page 30.
Mounting
Hole
A
B
C
D
E
Support Tube
WHEELCHAIR EQUIPPED WITH:
VAN SEAT WITH NON-HEMI FRONT RIGGING
Rear Adjustable Height Tube
Mounted in hole A
Mounted in hole B
Mounted in hole C
Mounted in hole D
Mounted in hole E
VAN SEAT WITH HEMI FRONT RIGGING OR
FOOTBOARD
Rear Adjustable Height Tube
Mounted in hole A
Mounted in hole B
Mounted in hole C
Mounted in hole D
Mounted in hole E
Pronto® M71™
All manuals and user guides at all-guides.com
Rear Adjustable
Height Tube
Locknut
Support Tube
FIGURE 4.2 Adjusting the Seat Height
AVAILABLE MOUNTING HOLES
Front Adjustable
Height Tube
AVAILABLE MOUNTING HOLES FOR
FRONT ADJUSTABLE HEIGHT TUBE
A B
N/A** N/A**
N/A** N/A**
N/A** N/A**
N/A** N/A**
N/A** N/A**
A B
N/A*
N/A* N/A*
N/A* N/A*
N/A* N/A*
32
Mounting
Hole
A
B
C
D
E
Mounting Screw
C D E
N/A** N/A** N/A**
N/A** N/A** N/A**
N/A** N/A**
N/A** N/A**
N/A** N/A**
C D E
N/A*
N/A* N/A*
Part No 1118377