12. MENU (magicolor 1650EN)
12.6 SYSTEM DEFAULT
12.6.1
PRINT QUALITY
Function
• Selects the image quality for prints.
Use
• To change the image quality setting.
Setting
• The default setting is HIGH.
/procedure
12.6.2
COLOR MODE
Function
• Specifies whether printing is in full color or grayscale.
Use
• To select color or grayscale printing.
Setting
• The default setting is COLOR.
/procedure
12.6.3
EMULATIONS
A. DEFAULT
Function
• Specifies the printer control language.
Use
• To change the printer control language.
• If [AUTOMATIC] is selected, the printer automatically selects the printer control lan-
guage from the data stream.
Setting
• The default setting is AUTOMATIC.
/procedure
B. AUTO DEFAULT
Function
• Selects the printer description language when it cannot be identified from the data.
Use
• To set the printer control language to be used when it cannot be automatically identi-
fied from the print job.
Setting
• The default setting is PCL5.
/procedure
C. POSTSCRIPT
(1) ERROR PAGE
Function
• Sets whether or not an error page is printed when a PostScript error occurs.
Use
• To specify whether an error page should be printed if a PostScript error occurs.
Setting
• The default setting is ON.
/procedure
76
"HIGH" / STANDARD
"COLOR" / GRAYSCALE
"AUTOMATIC" / POSTSCRIPT / PCL5 / PCL XL / HEX DUMP
"PCL5" / POSTSCRIPT
"ON" / OFF
Field Service Ver. 1.0 Nov. 2008