Ports And Connectors Specifications; Usb Ports; Nic Ports; Serial Connector - Dell PowerEdge R430 Owner's Manual

Ports and connectors specifications

USB ports

The PowerEdge R430 system supports:
● USB 2.0-compliant ports on the front panel
● USB 3.0-complaint and USB 2.0-compliant ports on the back panel
● USB 3.0-compliant internal port
The following table provides more information about the USB specifications:
Table 24. USB specifications
System
PowerEdge R430

NIC ports

The PowerEdge R430 system supports four 10/100/1000 Mbps Network Interface Controller (NIC) ports on the back panel.

Serial connector

The serial connector connects a serial device to the system. The PowerEdge R430 system supports one serial connector on the
back panel, which is a 9-pin connector, Data Terminal Equipment (DTE), 16550-compliant.

VGA ports

The Video Graphic Array (VGA) port enables you to connect the system to a VGA display. The PowerEdge R430 system
supports two 15-pin VGA ports one each on the front and back panels.

Internal Dual SD Module

The PowerEdge R430 system supports two optional flash memory card slots with an internal dual SD module.
One card slot is dedicated for redundancy.
NOTE:

Video specifications

The PowerEdge R430 system supports Matrox G200 graphics card with 16 MB capacity.
Table 25. Supported video resolution options
Resolution
640 x 480
800 x 600
1024 x 768
1152 x 864
1280 x 1024
Front panel
Two 4-pin, USB 2.0-compliant
ports
Refresh rate (Hz)
60, 70
60, 75, 85
60, 75, 85
60, 75, 85
60, 75
Back panel
One 9-pin, USB 3.0-compliant
port
One 4-pin, USB 2.0-compliant
port
Color depth (bits)
8, 16, 32
8, 16, 32
8, 16, 32
8, 16, 32
8, 16, 32
Internal
One 9-pin, USB 3.0-compliant
port
Technical specifications 35