Dell PowerEdge R430 Owner's Manual page 49

Viewing UEFI iSCSI Settings
To view the UEFI iSCSI Settings screen, perform the following steps:
Steps
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
If your operating system begins to load before you press F2, wait for the system to finish booting, and then
NOTE:
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click Network Settings.
5. On the Network Settings screen, click UEFI iSCSI Settings.
Related references
UEFI iSCSI Settings on page 48
UEFI iSCSI Settings details
The UEFI ISCSI Settings screen details are explained as follows:
Option Description
Specifies the name of the iSCSI initiator (iqn format).
ISCSI Initiator
Name
Enables or disables the iSCSI device. When disabled, a UEFI boot option is created for the iSCSI device
ISCSI Device n (n
automatically.
= 1 to 4)
System Security
You can use the System Security screen to perform specific functions such as setting the system password, setup password
and disabling the power button.
Related references
Operating with a setup password enabled
System BIOS on page 43
Related tasks
System Security Settings details
Viewing System Security
Creating a system and setup password
Using your system password to secure your system
Deleting or changing system and setup password
Viewing System Security
To view the System Security screen, perform the following steps:
Steps
1. Turn on, or restart your system.
on page 53
on page 50
on page 49
on page 52
on page 53
on page 52
Pre-operating system management applications 49