Front Bezel (Optional); Removing The Optional Front Bezel; Installing The Optional Front Bezel - Dell PowerEdge R430 Owner's Manual

● Wrist grounding strap

Front bezel (optional)

The front bezel is attached to the front side of the system and prevents accidents while removing the hard drive or when
pressing the reset or power button. The front bezel can also be locked for additional security.

Removing the optional front bezel

Steps
1. Locate and remove the bezel key.
The bezel key is attached to the back of the bezel.
NOTE:
2. Unlock the bezel by using the key.
3. Slide the release latch up, and pull the left end of the bezel.
4. Unhook the right end, and remove the bezel.
Figure 17. Removing the optional front bezel
a. bezel lock
b. front bezel

Installing the optional front bezel

Steps
1. Locate and remove the bezel key.
The bezel key is attached to the back of the bezel.
NOTE:
2. Hook the right end of the bezel onto the chassis.
3. Fit the free end of the bezel onto the system.
4. Lock the bezel by using the key.
Installing and removing system components 73