Dell PowerEdge R430 Owner's Manual page 44

Integrated Devices on page 61
Serial Communication on page 63
System Profile Settings on page 64
Miscellaneous Settings on page 66
iDRAC Settings utility on page 67
Device Settings on page 68
Related tasks
Viewing System BIOS on page 44
Viewing System BIOS
To view the System BIOS screen, perform the following steps:
Steps
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
If your operating system begins to load before you press F2, wait for the system to finish booting, and then
NOTE:
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
Related references
System BIOS on page 43
System BIOS Settings details
System BIOS Settings details
About this task
The System BIOS Settings screen details are explained as follows:
Option Description
Specifies information about the system such as the system model name, BIOS version, and Service Tag.
System
Information
Memory Settings Specifies information and options related to the installed memory.
Specifies information and options related to the processor such as speed and cache size.
Processor
Settings
Specifies options to enable or disable the integrated SATA controller and ports.
SATA Settings
Specifies options to specify the boot mode (BIOS or UEFI). Enables you to modify UEFI and BIOS boot
Boot Settings
settings.
Network Settings Specifies options to change the network settings.
Specifies options to manage integrated device controllers and ports and specify related features and
Integrated
options.
Devices
Specifies options to manage the serial ports and specify related features and options.
Serial
Communication
Specifies options to change the processor power management settings, memory frequency, and so on.
System Profile
Settings
44 Pre-operating system management applications
on page 44