Installing A Hard Drive Or Solid State Drives Into A Hard Drive Carrier - Dell PowerEdge R430 Owner's Manual

Steps
1. Remove the screws from the slide rails on the hard drive carrier.
2. Lift the hard drive out of the hard drive carrier.
Figure 40. Removing a hard drive from a hard drive carrier
a. screw (4)
b. hard drive
c. hard drive carrier
Next steps
If applicable, install a hard drive into the hard drive carrier.
Related tasks
Removing a hot swappable hard drive carrier

Installing a hard drive or solid state drives into a hard drive carrier

Prerequisites
Steps
1. Insert the hard drive into the hard drive carrier with the connector end of the hard drive toward the back of the carrier.
2. Align the screw holes on the hard drive with the screws holes on the hard drive carrier.
When aligned correctly, the back of the hard drive is flush with the back of the hard drive carrier.
3. Attach the screws to secure the hard drive to the hard drive carrier.
Figure 41. Installing a hard drive into a hard drive carrier
1. screw (4)
2. hard drive
3. hard drive carrier
102 Installing and removing system components
on page 95