Dell PowerEdge R430 Owner's Manual page 58

Option Description
Option
Family-Model-
Stepping
Brand
Level 2 Cache
Level 3 Cache
Number of Cores Specifies the number of cores per processor.
Related references
Processor Settings on page 56
Related tasks
Viewing Processor Settings
SATA Settings
You can use the SATA Settings screen to view the SATA settings of SATA devices and enable RAID on your system.
Related references
System BIOS on page 43
Related tasks
SATA Settings details on page 59
Viewing SATA Settings on page 58
Viewing SATA Settings
To view the SATA Settings screen, perform the following steps:
Steps
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
If your operating system begins to load before you press F2, wait for the system to finish booting, and then
NOTE:
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click SATA Settings.
Related references
SATA Settings on page 58
Related tasks
SATA Settings details on page 59
58 Pre-operating system management applications
Description
Specifies the family, model, and stepping of the processor as defined by Intel.
Specifies the brand name.
Specifies the total L2 cache.
Specifies the total L3 cache.
on page 56