Shindaiwa DG150MM Owners And Operation Manual page 21

< Note >
 When connecting a load, check that the generator output setting, output terminal connection
position, and load power source are all matching.
 If using the O terminal, be careful that the currents of each phase are uniform.
 Use proper tools when connecting a load to sufficiently tighten the connection. Failure
to sufficiently tighten the connection will result in cable burnout.
(1) 3-Phase Output Terminal
 For 3-phase load
Terminal voltage is 400/440 V [200/220 V] (50/60Hz).
* The values in brackets are for when set to 200/220V.
 For 1-phase load
Terminal voltage is 230/254 V [115/127 V] (50/60Hz).
* The values in brackets are for when set to 200/220V.
 For 1-phase load
Terminal voltage is 400/440 V [200/220 V] (50/60Hz).
* The values in brackets are for when set to 200/220V.
Load
TOTAL 125/150kVA（100/120kW）
Load Load Load
TOTAL 125/150kVA（100/120kW）
Load Load Load
TOTAL 125/150kVA（100/120kW）
18