[Emulate]; [Function Button]; [Audio Setting]; [Default] - Panasonic PT-VX431K Operating Instructions Manual

[EMULATE]

When controlling the projector on a computer via the <SERIAL IN> terminal, set use of control commands on a
previously purchased Panasonic projector. This allows the control software for an existing Panasonic projector to
be inherited and used.
1) Press as to select [EMULATE].
2) Press the <ENTER> button.
f The [EMULATE] screen is displayed.
3) Press as to select one item.
VW360 series, VX430 series, VX431K, VZ585N series, VW545N series, VX615N series, VZ580 series, VW540
series, VX610 series, VZ575N series, VW535N series, VX605N series, VZ570 series, VW530 series, VX600
series, VX60, VX50, EZ590 series, EZ57, EW650 series, EW550 series, EX620 series, EX520 series, FZ570

[DEFAULT]

series, FW530 series, FX500 series, VZ470 series, VW355N series, VX425N series, VW350 series, VX420
series, EZ580 series, EW640 series, EX610 series, EW540 series, EX510 series, VW345N series, VX415N
series, VW340Z, VX410Z, VX42Z, VX406EA, VX46EA, EZ770 series, EW730 series, EX800 series, RZ475
series, RZ470 series, RW430 series, RZ370 series, RW330 series
[D3500]
D3500 series
[D4000] D4000 series
[D/W5k SERIES] D5700 series, DW5100 series, D5600 series, DW5000 series, D5500 series
MZ670 series, DZ870 series, DW830 series, DX100 series, DZ780 series, DW750 series, DX820 series, DZ770
series, DW740 series, DX810 series, DZ680 series, DW640 series, DX610 series, DW730 series, DX800
[D/W/Z6k SERIES] series, DZ6710 series, DZ6700 series, DW6300 series, D6000 series, D5000 series, DZ570 series, DW530
series, DX500 series, RZ970 series, RW930 series, RX110 series, RZ770 series, RZ660 series, RW730 series,
RW620 series, RZ670 series, RW630 series, RZ575 series, RZ570 series
[L730 SERIES] L730 series, L720 series, L520 series
[L780 SERIES] L780 series, L750 series
[L735 SERIES] L735 series
[L785 SERIES] L785 series
[F/W SERIES] FW430 series, FX400 series, FW300 series, F300 series, F200 series, FW100 series, F100 series
[LZ370] LZ370 series
LB3 series, LB2 series, LB1 series, ST10 series, LB90 series, LW80NT series, LB80 series,
[LB/W SERIES]
LB78 series, LB75 series
VW435N series, VW440 series, VW430 series, VX505N series, VX510 series, VX500 series, VW330 series,
[VX500 SERIES]
VX400NT series, VX400 series, VX41 series
[EZ570 SERIES] EZ570 series, EW630 series, EW530 series, EX600 series, EX500 series
[VW431D] VW431D series
4) Press the <ENTER> button.

[FUNCTION BUTTON]

The function assigned to the <FUNCTION> button of the remote control is displayed. You can also release the
assigned setting.
Releasing assigned function to the <FUNCTION> button
1) Press as to select [FUNCTION BUTTON].
2) Press the <ENTER> button.
f The [FUNCTION BUTTON] screen is displayed.
3) Press the <ENTER> button.
4) When the confirmation message is displayed, select [OK] and press the <ENTER> button.
Note
f You can also cancel the assigned settings by displaying the on-screen menu, selecting the menu item to be canceled (main menu, sub-
menu or details menu), and then pressing the <FUNCTION> button for at least 3 seconds.

[AUDIO SETTING]

You can perform more detailed setting for Audio.
74 - ENGLISH
Chapter 4 Settings - [PROJECTOR SETUP] menu