Table of Contents
Advertisement
Control functions
1. Display brightness level
To adjust the display brightness
1.
Turn the key to the off position.
2.
Push and hold down the "SELECT" but-
ton.
3.
Turn the key to the on position, and then,
after 5 seconds, release the "SELECT"
button.
4.
Push the "RESET" button to select the
desired display brightness level, and
then push the "SELECT" button. The dis-
play returns to the previous display
mode.
ESU10412
High beam indicator light " "
The high beam indicator light comes on when
the high beams of the headlights are
switched on. (See page 20 for headlight
beam switch operation.)
1. High beam indicator light "
16
ESU10474
Low coolant temperature indi-
cator light " "
The low coolant temperature indicator light
comes on when the coolant temperature is
low and informs the rider that the snowmobile
should be warmed up. After the engine is
1
started, warm it up until the indicator light
goes off.
The snowmobile can be operated normally
after the indicator light goes off.
1. Low coolant temperature indicator
TIP
Drive the snowmobile at low speeds when
the low coolant temperature indicator light is
on. If the engine speed is too high, maximum
engine speed is reduced to protect the en-
gine.
ESU10428
Fuel meter and grip/thumb
warmer level indicator
The fuel meter and grip/thumb warmer level
indicator have eight segments which show
the amount of fuel remaining in the fuel tank,
the grip warmer level, or the thumb warmer
level.
"
light "
"
Advertisement
Table of Contents
