Table of Contents
Advertisement
2
1. Headlight unit bolt
2. Windshield stay bolt
3.
Unhook the headlight unit as shown,
then lift it up and move it forward, away
from the handlebar. NOTICE: Be careful
not to scratch the snowmobile when
moving the headlight unit.
1. Headlight unit
4.
Disconnect the headlight coupler.
5.
Remove the bulb holder cover.
1
2
1. Headlight coupler
2. Bulb holder cover
Periodic maintenance and adjustment
1
[ECS00921]
6.
Unhook the bulb holder, and then re-
move the burnt-out bulb.
1. Bulb holder
7.
Install a new bulb, and then hook the
bulb holder onto the headlight unit.
NOTICE: Keep oil and your hands
away from the glass part of the bulb or
its life and illumination will be affect-
ed. If the glass is oil stained, thorough-
ly clean it with a cloth moistened with
alcohol or lacquer thinner.
1
1
1. Do not touch the glass part of the bulb.
Bulb type:
Halogen bulb
8.
Install the bulb holder cover, and then
connect the headlight coupler.
9.
Install the headlight unit, making sure to
fit the slots on its bottom onto the projec-
tions on its stay.
1
[ECS00622]
77
Advertisement
Table of Contents
