Table of Contents
Advertisement
Control functions
Tripmeter shows the distance traveled since
it last reset.
Pushing the select/reset button switches the
display between the odometer mode "ODO"
and the tripmeter mode "TRIP" in the follow-
ing order:
ODO → TRIP → ODO
To reset the tripmeter, push the select/reset
button for at least 1 second while the tripme-
ter is displayed.
TIP
Odometer resets and continues counting
when it reaches 99999 while riding. How-
ever on the 10th time, the odometer will
lock at 99999.
Tripmeter resets and continues counting
when it reaches 999.9 while riding.
ESU14960
D-mode (drive mode)
(RST90TF / RST90TFL /
RST90TFY)
D-mode is an electronically controlled engine
performance system with three mode selec-
tions: "S", "T", and "E".
Sport mode "S"
This mode offers a sportier engine response
compared to the other modes.
Touring mode "T"
This mode allows the rider to enjoy smooth
drivability from the low-speed range to the
high-speed range.
Entry mode "E"
This mode offers a reduction of engine power
compared to the other modes and is suitable
for the entry-level rider.
16
1
1. "MODE" button
Push the "MODE" button to switch between
modes.
EWS00840
WARNING
Do not change the D-mode while the vehi-
cle is moving.
TIP
The throttle lever must be completely
closed in order to change the drive mode.
Before using D-mode, make sure you un-
derstand its operation along with the oper-
ation of the "MODE" button.
ESU10412
High beam indicator light " "
The high beam indicator light comes on when
the high beams of the headlights are
switched on. (See page 23 for headlight
beam switch operation.)
RST90TF / RST90TFL / RST90TFY
1. High beam indicator light "
"
Advertisement
Table of Contents
