Passenger Grip Warmer Switch; Passenger Footrests - Yamaha RS VENTURE 2014 Owner's Manual

1. Passenger grip
2. Passenger grip adjusting knob
To change the passenger grip posi-
tion
1. Remove the passenger grip adjusting
knob by turning it counterclockwise.
2. Move the passenger grip to the desired
position.
3. Install the adjusting knob by turning it
clockwise.
EWS00781
WARNING
Make sure that the passenger grip adjust-
ing knobs are securely tightened after
changing the positions of the passenger
grips.
ESU10682

Passenger grip warmer switch

The passenger grip warmer switch controls
the electrically heated passenger grips.
1
2
Control functions
1
1. Passenger grip warmer switch
2. Off
3. "HI" (high)
4. "LO" (low)
ESU14611

Passenger footrests

The passenger footrests can be installed in
three different positions to suit the passen-
ger's preference.
To change the position of a footrest, remove
the screws, place the footrest in the desired
position, and then install and tighten the
screws.
2
1. Footrest
2. Screw
ECS00132
NOTICE
 Make sure that the screws are tightened
securely after changing the position of
the footrests.
 Do not overtighten the screws, other-
wise the footrest may be damaged.
4 2 3
1
25