Table of Contents
Advertisement
1. Headlight beam switch "LIGHTS"
2. High beam "HI"
3. Low beam "LO"
ESU12655
Grip/thumb warmer adjusting
switch
The grip warmer adjusting switch and the
thumb warmer adjusting switch control the
electrically heated handlebar grips and throt-
tle lever respectively.
1
1. Grip warmer adjusting switch
1. Thumb warmer adjusting switch
Control functions
To raise the temperature
To raise the temperature, press the respec-
tive switch to "HI".
To lower the temperature
To lower the temperature, press the respec-
tive switch to "LO".
See "Fuel meter and grip/thumb warmer level
indicator" on page 16 for detailed informa-
tion.
ESU10697
Auxiliary DC jack
The auxiliary DC jack is located in the front
panel and can be used for accessories.
TIP
The auxiliary DC jack can only be used if the
engine is running.
To use the auxiliary DC jack
1.
Start the engine.
2.
Open the auxiliary DC jack cap, and then
insert the accessory power plug into the
jack.
1. Auxiliary DC jack cap
2. Auxiliary DC jack
3.
After using the auxiliary DC jack, be sure
to remove the accessory power plug
from the jack and to close the auxiliary
DC jack cap.
1
2
21
Advertisement
Table of Contents
