Table of Contents
Advertisement
Periodic maintenance and adjustment
1.
Place the snowmobile on a level surface
and apply the parking brake.
2.
Remove the shroud, the left and right
side covers, and the top cover. (See
page 50 for removal procedures.)
3.
Remove the headlight unit bolt and the
windshield stay bolts on each side of the
snowmobile.
2
1. Headlight unit bolt
2. Windshield stay bolt
4.
Unhook the headlight unit as shown,
then lift it up and move it rearward, away
from the air filter case cover. NOTICE:
Be careful not to scratch the snowmo-
bile when moving the headlight unit.
[ECS00921]
1. Headlight unit
5.
Remove the air filter case cover by un-
hooking the fasteners.
56
6.
1
1
7.
1
1. Air filter case cover fastener
Lift up the air filter element frame and
check the air filter element. If there is any
snow on the air filter element, remove the
element, brush off the snow, and then in-
stall the air filter element.
1. Air filter element frame
Place the air filter element frame in the
original position, and then install the air
filter case cover by hooking the fasten-
ers.
1
1
Advertisement
Table of Contents
