Table 2.28 Displayed And Setting Items In The [Power Control] Window - Fujitsu PRIMEQUEST 500A Series Installation Manual

2.5.9 Starting a partition
This section explains how to start a partition that is in operation.
Procedure
1
Click [Partition]
The [Power Control] window is displayed.
2
In the [Power Control] window, select [Power On] for the partition, and click the
[Apply] button.

Table 2.28 Displayed and setting items in the [Power Control] window

Item
Power Control
C122-E001-10EN
→
[Power Control].
Figure 2.49 [Power Control] window
Select a power control setting to be displayed for the partition.
The [Power On] menu item is not displayed for a powered-on partition.
Conversely, the [Power Off], [Power Cycle], [Reset], [INIT], and
[Force Power Off] menu items are not displayed for a powered-off
partition.
• Power On: Powers on the partition.
• Power Off: Powers off the partition.
• Power Cycle: Forcibly powers off the partition and powers it on
again.
• Reset: Resets the partition.
• INIT: Generates an INIT interrupt for the partition and produces a
Dump.
• Force Power Off: Forcibly powers off the partition.
• Not specified: Takes no action for the partition.
Note:
• To forcibly terminate applications running in the partition, execute
INIT. Before executing INIT, stop important applications. Also,
unmount unnecessary file systems.
2.5 Partition Initialization
Description
2-71