Table of Contents
Advertisement
14 Click the [Advanced] tab, select [Probe] in [Settings], select [Enable] in [Value],
and click the [OK] button.
As a result, the adapter activates its link monitoring function, thereby setting
management LAN duplication.
Reboot to make the Teaming settings effective.
4.5.2
Setting the destination of trap sending from the partition
Note:
1
Click [Control Panel]
2
Click [Computer Management].
3
In the left tree, click [Services and Applications]
4
In the right pane, click [SNMP Service].
The [SNMP Service] dialog box appears.
5
Click the [Trap] tab.
6
Enter the desired community name in the [Community Name] field, and click
[Add to List].
7
Click [Add] in the [Trap Send Destination] area.
C122-E001-10EN
4.5 PSA Installation (Windows Server 2003) (PRIMEQUEST 580A/540A/580/540/480/440)
Figure 4.23 [Advanced] tab
SNMP v.3 is not supported in Windows.
Perform the tasks for this setting only if the setting is required.
If partitions are managed by operation management software, this setting
is required.
→
[Administrative Tools].
→
[Services].
4-75
Advertisement
Chapters
Table of Contents
