Fujitsu PRIMEQUEST 500A Series Installation Manual page 311

4.10.1.2 Setting a memory dump
Setting a complete memory dump
Complete memory dump cannot be set from the system dump setting window. It can
be set by changing the following registry value:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\CrashControl
"CrashDumpEnabled" (type: REG_DWORD, data: 0x1)
After changing the setting, restart the system. For details on the dump file save path
and overwrite settings, see
dump."
Setting a kernel memory dump/minimum memory dump
Set the memory dump file as follows:
1
Log on to the server with the administrator privilege.
2
Check the amount of free space on the drive on which the memory dump file is to
be stored.
For details, see
3 Click [Start]
The [System Property] dialog box appears.
4
Click the [Detail Setting] tab, and click [Set] at [Startup and Recovery].
The [Startup and Recovery] dialog box appears.
C122-E001-10EN
4.10 Setting Up the Dump Environment (Windows Server 2003)
"Setting a kernel memory dump/minimum memory
Section 4.10.1.4, "Setting the paging file."
→ →
[Control Panel] [System].
4-125