Fujitsu PRIMEQUEST 500A Series Installation Manual page 152

CHAPTER 3 Operating System Installation
(2) Setting up the accounts for MMB access
The user information required for remote control of the MMB with SystemcastWizard
Lite can be specified.
If following message is displayed, connect the USB floppy disk drive to the KVM
USB port, and insert the driver disk created following the remark in Step 3 into the
floppy disk drive.
1
Click [Network Configuration]
Web-UI window. The [Remote Server Management] window is displayed.
Figure 3.16 [Remote Server Management] window
3-30
→
[Remote Server Management] in the MMB
C122-E001-10EN