Samson TROVIS 3730-3 Mounting And Operating Instructions page 27

Signal state
Static destruction limit
Inductive limit contacts
Version
Measuring plate not de-
tected
Measuring plate detected
Static destruction limit
Perm. ambient
temperature
Binary input (switching behavior configured in TROVIS-VIEW software)
Active switching behavior (default setting)
Port
Open-circuit voltage
Current draw
Contact
Passive switching behavior
Port
Voltage input
Static destruction
limit
Current draw
Switching voltage
Forced venting
Version
Voltage input
Input resistance
Active
Signal state
Not active
Static destruction limit
EB 8484-3 EN
≤1.0 mA (non-conducting)
≥2.2 mA (conducting)
32 V DC/24 V AC
For connection to switching amplifier according to EN 60947-5-6, SJ2-SN
proximity switches, reverse polarity protection
≥3 mA
≤1 mA
20 V DC
–50 to +85 °C
For external switch (floating contact) or relay contact
Max. 10 V (when contact is open)
Max. 100 mA (pulsed when contact is closed)
Closed: R <20 Ω; open: R >400 Ω
For externally applied DC voltage, reverse polarity protection
0 to 30 V
40 V DC
3.7 V at 24 mA
Closed: <1 V; open: >6 V
Galvanic isolation, reverse polarity protection
0 to 24 V DC
≥7 kΩ
Ue <11 V
Ue >15 V
38 V DC/30 V AC
Design and principle of operation
R = 10 kΩ (non-conducting)
R = 348 Ω (conducting)
16 V DC/50 mA
3-9