Samson TROVIS 3730-3 Mounting And Operating Instructions page 172

Annex A (configuration instructions)
Menu
Tests
Step response test (PST)
Start PST
Test status
Canceled: x monitoring
Step response test (FST)
Start FST
Test status
Diagnosis: status messages
Menu
Diagnosis/
maintenance
Device state
Status messages
Condensed state
Start-up
Initialization error
Incorrect operating
mode
Travel too small
The displayed value is merely intended as information. No error message is displayed with the ambient
1)
temperature exceeds or falls below the permissible range (see Technical data in the 'Design and principle of
operation' section).
16-14
Adjustment range/values [default setting]/description
10.2
10.2.1
10.2.1.1
10.2.1.3
10.2.1.4
10.2.2
10.2.2.1
10.2.2.3
10
10.1
10.1.1
10.1.1.1
10.1.1.2
10.1.1.3
10.1.1.4
Recommended action: Change operating mode.
10.1.1.5
10.1.1.6
Recommended action: Check positioner attachment, pin position and supply
10.1.1.7
Test to check the valve's ability to move and assess its
dynamic control response
(PST: partial stroke test/FST: full stroke test).
Start test
Reading as progress bar
Reading in %. Canceled when range is violated.
Start test
Reading as progress bar
Adjustment range/values [default setting]/description
Status indicators
Status indicators
Status indicators
The incorrect operating mode is set.
Confirm to clear message.
The determined travel is below the limit.
pressure.
Confirm to clear message.
EB 8484-3 EN