Samson TROVIS 3730-3 Mounting And Operating Instructions page 166

Annex A (configuration instructions)
Menu
Tip
The control parameters are explained in the SAMSON brochure u Controllers and Controlled Systems
as part of the Technical Information series (www.samsongroup.com > Service & Support > Downloads
> Documentation).
Dead band
Activate integral-action
component
User-defined control
parameters
Loop gain (supply)
Kp (supply)
Ki (supply)
Kd (supply)
Loop gain (exhaust)
Kp (exhaust)
Ki (supply)
Kd (exhaust)
End position (optimized)
Options
Module status
Identification
Option A
Module status
Identification
Option B
Module status
Identification
Limit switch 1
Limit contact 2
16-8
Adjustment range/values [default setting]/description
8.4.1 [0.1] to 100.0 %
[Active]/Not active
8.4.2
[Not active]/Active
8.4.3
1 to 650 [10]
8.4.4
8.4.5 0.1 to 200 [27]
8.4.6 0.1 to 100 [7.5]
0.5 to 200 [100]
8.4.6
8.4.8 1 to 650 [50]
8.4.9 0.1 to 200 [18]
8.4.10 0.1 to 100 [7.5]
0.5 to 200 [100]
8.4.11
8.4.12 [Active]/Not active
8.5
8.5.1 Read only
8.5.2 Read only
8.5.3 Parameters for option A (see parameter description on
page 16-10 onwards)
8.5.4 Read only
8.5.5 Read only
Parameters for option B (see parameter description on
8.5.6
page 16-10 onwards)
8.5.7 Read only
8.5.8 Read only
8.5.9...
8.5.10...
EB 8484-3 EN