Samson TROVIS 3730-3 Mounting And Operating Instructions page 175

Menu
Process data
Operating mode
not AUTO
Forced venting
function
Test in progress
Emergency mode
active
Control valve
diagnosis
PST
PST: cancellation
criteria met
PST: start criteria
not met
FST
FST: cancellation
criteria met
FST: start criteria
not met
AMR signal outside
range
EB 8484-3 EN
10.1.1.35
10.1.1.36
10.1.1.37
Recommended action: Check supply voltage. Search for the reason why the
10.1.1.38
10.1.1.39
Recommended action: Check travel measurement.
10.1.1.40
10.1.1.41
10.1.1.42
Recommended action: Positioner configuration. Check valve and positioner
10.1.1.43
Recommended action: Check the positioner configuration.
10.1.1.44
10.1.1.45
Recommended action: Positioner configuration. Check valve and positioner
10.1.1.46
Recommended action: Check the positioner configuration.
10.1.1.47
Recommended action: Check positioner attachment, pin position and supply
10.1.1.48
Annex A (configuration instructions)
Adjustment range/values [default setting]/description
Status indicators
The positioner is in an operating mode other than
AUTO. An error does not exist.
The forced venting is active.
forced venting was triggered.
The positioner is in the test mode (e.g. initialization
process, step response test etc.).
Test mode can be canceled.
Emergency mode is active. Possible cause: travel
measurement does not function properly.
Status indicators
Status indicators
PST is canceled.
attachment.
PST did not start.
Status indicators
FST is canceled.
attachment.
FST did not start.
Travel measurement is defective. Possible cause: an
external malfunction or a hardware error may possibly
exist.
air. Check power supply/electrical signal.
Confirm to clear message.
16-17