Samson TROVIS 3730-3 Mounting And Operating Instructions page 171

Menu
Fixed value
(communication)
Fixed value over binary
input
Fixed value over binary
input
Diagnosis/maintenance
Device state
Status messages
Condensed state
Start-up
Configuration
Process data
Diagnostics
Total valve travel
Total valve travel limit x
1000
Lag time for set point
deviation
Tolerance band for set
point deviation +/-
Max. temperature inside
device
1)
Min. temperature inside
device
1)
Operating hours counter
Number of initializations
Number of zero
calibrations
EB 8484-3 EN
Adjustment range/values [default setting]/description
9.11 Active/Not active
9.12 Reading in %
9.13 Active/Not active
10
10.1
10.1.1
10.1.1.1
10.1.1.2
10.1.1.29
Messages which may be displayed:
see parameter descriptions on page 16-14 onwards
10.1.1.35
10.1.1.40
10.1.2 Totaled full valve travel cycle
10.1.3 Limit of total valve travel limit
10.1.4 Reading in s. The lag time can only be set using the
operator software.
10.1.5 Used for error monitoring.
10.1.6 Reading in °C
10.1.7 Reading in °C
10.1.8 Reading in d:hh:mm:ss
10.1.9 Number of initializations performed
10.1.10 Reading indicates the number of zero calibrations
performed since the last initialization.
Annex A (configuration instructions)
16-13