Samson TROVIS 3730-3 Mounting And Operating Instructions page 177

Menu
Temperature inside
device below min.
limit
Temperature inside
device above max.
limit
Angle limitation
Logging suspended 10.1.1.66
Operating range in
CLOSED position
Operating range in
max. OPEN
position
Limited working
range: lower range
Limited working
range: upper range
EB 8484-3 EN
10.1.1.62
Recommended action: Check the ambient temperature.
10.1.1.63
Recommended action: Check the ambient temperature.
10.1.1.64
Recommended action: Check positioner attachment, pin position and supply
10.1.1.65
Recommended action: Restart the positioner.
10.1.1.67
10.1.1.68
Recommended action: Check the attachment as well as the control valve to
10.1.1.69
Recommended action: Check the attachment as well as the control valve to
10.1.1.72
Recommended action: Check the attachment as well as the control valve to
10.1.1.73
Recommended action: Check the attachment as well as the control valve to
Annex A (configuration instructions)
Adjustment range/values [default setting]/description
Warning not affecting the positioner's functioning.
Warning not affecting the positioner's functioning.
The maximum permissible angle of rotation (±30°) has
been exceeded (only in open-loop control mode).
air.
Confirm to clear message.
It was not possible to write all logging entries (possibly
the volume data was briefly too high).
Confirm to clear message.
The operating range may have shifted and is close to
the end position.
ensure it functions properly.
The operating range may have shifted and is close to
the end position.
ensure it functions properly.
There may be leakage or a blockage.
ensure it functions properly.
There may be leakage or a blockage.
ensure it functions properly.
16-19