Samson TROVIS 3730-3 Mounting And Operating Instructions page 169

Menu
Limit
Current state
Signal of analog output
Current state
Signal of analog output
Start DO test.
Start AO test.
Test mode
Test signal of analog
output
Option B
Function
Configuration
Action upon active
binary input
Fixed value over binary
input
Edge control
Function
Mode
Edge control
Function
Function
Position transmitter's
direction of action
EB 8484-3 EN
Adjustment range/values [default setting]/description
8.5.3.15 –20.0 to 120.0 %
8.5.3.16 Read only
8.5.3.17 Read only
8.5.3.18 Read only
8.5.3.19 Read only
8.5.3.20 Confirm to start.
8.5.3.21 Confirm to start.
8.5.3.22 Read only
8.5.3.23 –10.0 to 110.0 %
8.5.6
8.5.6.3 Binary input (24 V)
8.5.6.4 Contact (switch)
Contact (0 to 24 V)
8.5.6.5 Switching state
Activate local write protection
Start PST
Start FST
Move valve to fixed value
8.5.6.6 0.0 to 100.0 %
8.5.6.7 Active = Switch closed
Active = Switch open
8.5.6.8 Reading
Software limit switch
Fault alarm output
8.5.6.9 Below limit
Above limit
8.5.6.10 Conducting/high
Locking/low
8.5.6.11 Leakage sensor
8.5.6.12 Position transmitters
8.5.6.13 Increasing/increasing
Increasing/decreasing
Annex A (configuration instructions)
16-11