HP 8163A Series Programming Manual page 73

Measurement Functions – The SENSe Subsystem
command:
syntax:
description:
parameters:
response:
example:
affects:
dual sensors:
command:
syntax:
description:
parameters:
response:
example:
affects:
dual sensors:
command:
syntax:
description:
parameters:
response:
example:
affects:
dual sensors:
HP 8163A Lightwave Multimeter, HP 8164A Lightwave Measurement System,
& HP 8166A Lightwave Multichannel System User's Guide, E1299
:SENSe[n]:[CHANnel[m]]:CORRection:COLLect:ZERO
:SENSe[n]:[CHANnel[m]]:CORRection:COLLect:ZERO
Zeros the electrical offsets for a power meter or return loss module.
none
none
sens1:corr:coll:zero
All power meters and return loss modules
Can only be sent to master channel, slave channel is also zeroed.
:SENSe[n]:[CHANnel[m]]:CORRection:COLLect:ZERO?
:SENSe[n]:[CHANnel[m]]:CORREction:COLLect:ZERO?
Returns the status of the most recent zero command.
none
0:
any other number:
sens1:corr:coll:zero? → 0<END>
All power meters and return loss modules
Master and slave channels are independent.
:SENSe[n]:[CHANnel[m]]:CORRection:COLLect:ZERO:ALL
SENSe[n]:[CHANnel[m]]:CORRection:COLLect:ZERO:ALL
Zeros the electrical offsets for all installed power meter and return loss modules.
none
none
sens:chan:corr:coll:zero:all
All power meters and return loss modules
Command is independent of channel.
N O T E Setting parameters for the logging function sets some parameters, including
hidden parameters, for the stability and MinMax functions and vice versa. You
must use the :SENSe[n][:CHANnel[m]]:FUNCtion:PARameter:LOGGing
Measurement Operations & Settings
zero succeeded without errors.
remote zeroing failed (the number is the error code returned
from the operation).
73