Other Commands - HP 8163A Series Programming Manual

The Status Model
*OPT? returns the installed modules and the slots these modules are installed
*WAI
*IDN? identifies the instrument; returns the manufacturer, instrument model
HP 8163A Lightwave Multimeter, HP 8164A Lightwave Measurement System,
& HP 8166A Lightwave Multichannel System User's Guide, E1299

Other Commands

in:
For example, *OPT? → 81682A, 81533B, 81532A, ,
Modules 81682A, 81533B, and 81532A are installed in slots 0 to 2 re-
spectively. Slots 3 and 4 are empty.
prevents the instrument from executing any further commands until the
current command has finished executing. All pending operations are
completed during the wait period.
number, serial number, and firmware revision level.
Introduction to Programming
31