Interface/Instrument Behaviour Settings - The System Subsystem - HP 8163A Series Programming Manual

Interface/Instrument Behaviour Settings – The SYSTem Subsystem
command:
syntax:
description:
parameters:
response:
example:
command:
syntax:
description:
parameters:
response:
example:
command:
syntax:
description:
parameters:
response:
example:
HP 8163A Lightwave Multimeter, HP 8164A Lightwave Measurement System,
& HP 8166A Lightwave Multichannel System User's Guide, E1299
:STATusn:QUEStionable:ENABle
:STATusn:QUEStionable:ENABle<wsp><value>
Sets the bits in the Questionable Slot Status Enable Mask (QSSEM) for slot n that enable
the contents of the Questionable Slot Status Register (QSSR) for slot n to affect the QS-
ESR.
Setting a bit in this register to 1 enables the corresponding bit in the QSSER for slot n to
affect bit n of the QSESR.
The bit value for the QSSEM as a 16-bit signed integer value (0 .. +32767)
none
stat:ques:enab 128
:STATusn:QUEStionable:ENABle?
:STATusn:QUEStionable:ENABle?
Returns the QSSEM for slot n
none
The bit value for the QSSEM as a 16-bit signed integer value (0 .. +32767)
stat:ques:enab? → +128<END>
Interface/Instrument
Behaviour Settings – The
SYSTem Subsystem
The SYSTem subsystem lets you control the instrument's serial interface. You can
also control some internal data (like date, time, and so on).
:SYSTem:DATE
:SYSTem:DATE<wsp><year>,<month>,<day>
Sets the instrument's internal date.
• the first value is the year (four digits),
• the second value is the month, and
• the third value is the day.
none
syst:date 1999, 1, 12
Instrument Setup and Status
59