HP 8163A Series Programming Manual page 124

Mass Storage, Display, and Print Functions
command:
syntax:
description:
parameters:
N O T E
response:
example:
command:
syntax:
description:
parameters:
response:
example:
124
:DISPlay:ENABle
:DISPlay:ENABle<wsp><boolean>
Enables or disables the display.
A boolean value: 0 – switch off the display
1 – switch on the display
If you press [L ] softkey, the display is enabled automatically.
OCAL
none
disp:enab 1
:DISPlay:ENABle?
:DISPlay:ENABle?
Queries the state of the display.
none
A boolean value: 0 – the display is turned off
1 – the display is turned on
disp:enab? → 1<END>
HP 8163A Lightwave Multimeter, HP 8164A Lightwave Measurement System,
& HP 8166A Lightwave Multichannel System User's Guide, E1299
Display Operations – The DISPlay Subsystem