HP 8163A Series Programming Manual page 38

Lightwave multimeter, lightwave measurement system & lightwave multichannel system, mainframes
Hide thumbs Also See for 8163A Series:
Table of Contents

Advertisement

Specific Commands
Command
[:SOURce[n]][:CHANnel[m]]
:MODout/?
[:SOURce[n]][:CHANnel[m]:]AM
[:INTernal]:FREQuency[l]/?
:SOURce[l]/?
:STATe[l]/?
[:SOURce[n]][:CHANnel[m]:]POWer
[
LEVel][
:
[
LEVel][
:
[:LEVel]:RISetime/?
:ATTenuation[l]/?
:STATe/?
:UNIT/?
:WAVelength/?
[:SOURce[n]][:CHANnel[m]:]POWer:ATTenuation
:AUTO/?
:DARK/?
[:SOURce[n]][:CHANnel[m]:]READout
:DATA?
:POINts?
[:SOURce[n]][:CHANnel[m]:]WAVelength
[:CW|:FIXED]
[:CW|:FIXED[l]]?
:FREQuency/?
:REFerence?
[:SOURce[n]][:CHANnel[m]:]WAVelength:CORRection
:ARA
38
IMMediate][
AMPLitude]
:
:
IMMediate][
AMPLitude[l]]
:
:
Table 4
Specific Command Summary (continued)
HP 8163A Lightwave Multimeter, HP 8164A Lightwave Measurement System,
& HP 8166A Lightwave Multichannel System User's Guide, E1299
Description
Returns the mode of the modulation output.
Sets or returns the frequency of an internal signal
source.
Sets or returns a source for the modulating system. 89
Turns Amplitude Modulation of a source on or off or
returns whether Amplitude Modulation is on or off.
Sets the laser output power of a source.
Returns the laser output power of a source.
?
Sets or returns the laser rise time of a source.
Sets or returns the attenuation level for a source.
Sets or returns the state of the source output signal. 96
Sets or returns the power units.
Sets or returns the wavelength source of a dual-
wavelength source.
Selects Automatic or Manual Attenuation Mode for
a source or returns the selected mode.
Enables/disables 'dark' position on a source or re-
turns whether 'dark' position is active for a source.
Returns number of datapoints returned by the
[:SOURce[n]][:CHANnel[m]]:READout:POINts?
command.
Returns the data as a binary stream from either a
lambda logging operation or the maximum power
the laser can produce at each wavelength.
Sets the absolute wavelength of a source.
Returns the absolute wavelength of a source.
Sets the frequency difference used to calculate a rel-
ative wavelength for a source.
Returns the reference wavelength of a source.
Realigns the laser cavity.
Specific Command Summary
Page
91
88
90
94
95
95
92
96
99
93
93
98
98
99
99
100
101
100

Advertisement

Table of Contents
loading

This manual is also suitable for:

8164a series8166a series

Table of Contents