Status Reporting - The Status Subsystem - HP 8163A Series Programming Manual

Instrument Setup and Status
command:
syntax:
description:
parameters:
response:
example:
50
Status Reporting – The STATus
Subsystem
The Status subsystem allows you to return and set details from the Status Model.
For more details, see "The Status Model" on page 25.
:STATus:OPERation[:EVENt][:LEVel0]?
:STATus:OPERation[:EVENt][:LEVel0]?
Returns the Operational Status Event Summary Register (OSESR).
none
The sum of the results for the slots (a 16-bit signed integer value, where 0 ≤ value ≤
32767):
Bits
HP 8163A
15 Not used
14 Not used
13 Not used
12 Not used
11 Not used
10 Not used
9 Not used
8 Not used
7 Not used
6 Not used
5 Not used
4 Not used
3 Not used
2 Slot 2 Summary
1 Slot 1 Summary
0 Not used
stat:oper? → +0<END>
HP 8163A Lightwave Multimeter, HP 8164A Lightwave Measurement System,
& HP 8166A Lightwave Multichannel System User's Guide, E1299
Status Reporting – The STATus Subsystem
Mnemonics
HP 8164A HP 8166A
Not used Not used
Not used Slot 14 Summary
Not used Slot 13 Summary
Not used Slot 12 Summary
Not used Slot 11 Summary
Not used Slot 10 Summary
Not used Slot 9 Summary
Not used Slot 8 Summary
Not used Slot 7 Summary
Not used Slot 6 Summary
Not used Slot 5 Summary
Slot 4 Summary Slot 4 Summary
Slot 3 Summary Slot 3 Summary
Slot 2 Summary Slot 2 Summary
Slot 1 Summary Slot 1 Summary
Slot 0 Summary Level 1 Summary
Decimal Value
0
16384
8192
4096
2048
1024
512
256
128
64
32
16
8
4
2
1