HP 8163A Series Programming Manual page 101

Signal Generation – The SOURce Subsystem
command:
syntax:
description:
parameters:
response:
example:
affects:
command:
syntax:
description:
parameters:
response:
example:
affects:
command:
syntax:
description:
parameters:
response:
example:
affects:
command:
syntax:
description:
parameters:
response:
example:
affects:
HP 8163A Lightwave Multimeter, HP 8164A Lightwave Measurement System,
& HP 8166A Lightwave Multichannel System User's Guide, E1299
[:SOURce[n]][:CHANnel[m]]:WAVelength:REFerence?
[:SOURce[n]][:CHANnel[m]]:WAVelength:REFerence?
Returns the reference wavelength (λ
none
The wavelength as a float value in meters.
→
sour2:wav:ref? +1.5500000E-006<END>
All tunable laser and DFB modules
[:SOURce[n]][:CHANnel[m]]:WAVelength:REFerence:DISPlay
[:SOURce[n]][:CHANnel[m]]:WAVelength:REFerence:DISPlay
Sets the reference wavelength to the value of the output wavelength (λ → λ
sets the frequency offset (df) to zero.
none
none
sour2:wav:ref:disp
All tunable laser and DFB modules
[:SOURce[n]][:CHANnel[m]]:WAVelength:SWEep:CYCLes
[:SOURce[n]][:CHANnel[m]]:WAVelength:SWEep:CYCLes
<value>|MIN|MAX|DEF
Sets the number of cycles.
The number of cycles is an integer value.
Also allowed are: MIN: minimum programmable value
MAX: maximum programmable value
DEF: This is not the preset (*RST) default value but is half the
sum of, the minimum programmable value and the maximum
programmable value
none
wav:swe:cycl 3
All tunable laser modules
[:SOURce[n]][:CHANnel[m]]:WAVelength:SWEep:CYCLes?
[:SOURce[n]][:CHANnel[m]]:WAVelength:SWEep:CYCLes?
[<wsp>MIN|MAX|DEF]
Returns the number of cycles.
none
Also allowed are: MIN: minimum programmable value
MAX: maximum programmable value
DEF: This is not the preset (*RST) default value but is half the
sum of, the minimum programmable value and the maximum
programmable value
The number of cycles as an integer value.
→
wav:swe:cycl? +3<END>
All tunable laser modules
Measurement Operations & Settings
).
0
<wsp>
), that is,
0
101