Table of Contents
Advertisement
Combining Samples to Create a Pattern (PATTERN SEQUENCER)
Adding a Count-in Before Recording a Pattern
This feature adds a count-in before the pattern start recording. This gives you time to get ready to play before the
pattern actually begins recording.
1
Hold down the [SHIFT] button and press the pad [10].
Edit the count-in setting.
Value
COUNTIN 1MEAS
COUNTIN 2MEAS
COUNTIN WAIT
COUNTIN OFF
The value changes in order each time you press pad [10] while holding down the [SHIFT] button.
>
Explanation
Adds a one-measure count-in before recording.
Adds a two-measure count-in before recording.
Recording starts along with sample playback.
No count-in is used. Press the [REC] button to immediately begin recording.
Creating a New Pattern
Advertisement
Table of Contents
