Roland SP-404MK Reference Manual page 148

Appendix Parameter Guide
>
PAD SET
TRIGGER
Parameter Value
Curve Type Sets how the volume changes according to how hard you strike a pad.
Lin
Exp
Log
Fix
Threshold 1‒
100
Gain 0‒
100
Trig Span 1‒10
LED
Parameter Value
LED 1‒10
Brightness
LED Glow 1‒10
Pad LED This selects the color of the pad illumination.
Mode
BUS
Explanation
This is the standard setting. This produces the most natural balance between playing
dynamics and volume change.
Compared to "Lin," playing strongly produces a greater change in volume.
Compared to "Lin," playing softly produces a greater change in volume.
Sets the volume at a fixed level of 127.
This sets the minimum sensitivity of the pads, at which the trigger signal is received only
when a pad is struck with at least a certain amount of force (velocity). This can be used to
prevent a pad from sounding due to vibrations from other pads.
The sensitivity is adjusted with the curve as-is. The larger the value, the greater the
sensitivity is when playing the pads.
Adjusts the sensitivity of the pads to repeated strikes. With lower values, the pads detect
repeated strikes within a shorter time interval. Set this value higher if you donʼt want the
pad to accidentally detect repeated strikes.
Explanation
Sets the brightness of the indicators on the buttons and pads. This sets the brightness
when the buttons or pads are highlighted.
Sets the brightness of the indicators on the buttons and pads. This sets the brightness
when the buttons or pads are not highlighted.
The pads light up in the color set in "BUS COLOR."