Roland SP-404MK Reference Manual page 120

Customizing This Unit Customizing the Screen Saver
>
Saving the Screen Saver Image to a Project
Hereʼs how to save your custom image to a project. As an example, the following shows how to edit the custom image
for the screen saver of project 01.
1
Prepare the image to use for the screen saver, and edit the settings to use a custom screen saver
("Preparing a Screen Saver Image" and "Enabling a Custom Screen Saver").
2
Export the project for which you want to change the screen saver (project 01 in this example) to an SD
card ("Exporting a Project (EXPORT PROJECT)").
3
Remove the SD card from this unit, and open the contents on your computer.
4
Copy the screen saver image thatʼs saved in the SD card to the
"EXPORT/PROJECT/PROJECT̲01/PICTURE" folder. Change the filename to "screen̲saver̲*.bmp",
replacing the asterisk with a number from 1 to 16.
For details on the "/EXPORT/PROJECT/PROJECT̲01/PICTURE" folder, see the folder structure diagram
shown in "Importing/Exporting (Using the SD Card)."
5
Remove the SD card from your computer, and insert it into this unit.
6
Import the screen saver image into the project where it was registered ("Importing a Project (IMPORT
PROJECT)").
The screen saver that uses your custom screen saver is shown.