Roland SP-404MK Reference Manual page 51

Sampling (SAMPLING)
Configuring the Sampling Settings (RECORD SETTING)
Here you can configure the settings for sampling, such as the recording level, as well as apply input effects to the
sound input from an external source.
1
In sample mode, press the [REC] button.
The unit enters sampling standby mode.
2
Press the [RECORD SETTING] button.
The input setting screen appears.
3
Use the controllers to edit the parameters.
Controller
[CTRL 1] knob
[SHIFT] button
+ [CTRL 1]
knob
[CTRL 2] knob
[SHIFT] button
+ [CTRL 3]
knob
[CTRL 3] knob
Parameter Value
REC BPM 40.0‒
200.0
ROUTING This selects the source to sample (the input source).
Mix
ExtIn
PAN L:50‒
R:50
LEVEL 0‒
127
Explanation
Specifies the tempo. Use the [CTRL 1] knob while
holding down the [SHIFT] button to set the value more
precisely.
You can also set the tempo using the tap tempo
function. "Setting the Tempo in Time with the Rhythm
(Tap Tempo)"
Samples the mixed audio from this unit (the playback
audio) and the input from an external source.
Samples only the audio input from an external device.
Adjusts the pan position (the left-right volume balance
when sampling).
Adjust the recording level.