Table of Contents
Advertisement
[BUS FX] button
[HOLD] button
[EXT SOURCE]
button
[SUB PAD] button
Shortcuts that use the [REMAIN] button
While holding down the
[SHIFT] button
Pads [1]‒[16]
Bank [A/F]‒[E/J] buttons
[MFX] button
[BUS FX] button
Shortcuts that use the [VALUE] knob
While holding down the [VALUE] knob
Effect buttons ([FILTER+DRIVE]‒[MFX]
button)
Pads [1]‒[16]
Shortcuts that use the [DEL] button
MUTE BUS
Temporarily turns off the audio sent to the bus (the sample playback
sound or the sound inputted to the INPUT jack), and outputs only the
sound of the effect.
→"Temporarily Output Only the Effect Sound (MUTE BUS)"
PAUSE
Pauses the sample thatʼs currently playing back.
→"Pausing the Sound of a Sample (PAUSE)"
INPUT SETTING
Displays the input setting screen.
→"Configuring the Sampling Settings (RECORD SETTING)"
PROJECT
Displays the SELECT PROJECT screen.
→"Selecting a Project"
Function (explanation)
Sets which sample playback audio is sent to which bus (meaning which effects
are used) for each sample.
→"Deciding on Effects to Use for Each Sample"
Sets the bus send destination for all samples in a bank.
Makes the effect edit screen keep displaying.
→"Editing the Effects"
Exchanges (swaps) the effects of BUS 1 and BUS 2.
Function (explanation)
Applies effects only while you hold down the effect buttons (EFFECT
GRAB).
→"Turning Effects On/Off at the Desired Timing"
Selects a sample (no sound is produced).
Advertisement
Table of Contents
