Table of Contents
Advertisement
Sampling (SAMPLING)
Sampling
>
Adding a Count-in Before Sampling
This feature adds a count-in before sampling begins. This gives you time to get ready to play before sampling actually
begins.
1
Hold down the [SHIFT] button and press the pad [10].
The value changes in order each time you press pad [10] while holding down the [SHIFT] button.
Edit the count-in setting.
Value
COUNTIN
1MEAS
COUNTIN
2MEAS
COUNTIN
WAIT
COUNTIN
OFF
Explanation
Adds a one-measure count-in before sampling.
Adds a two-measure count-in before sampling.
When the input audio signal exceeds the level set in the Auto Trig Level parameter,
sampling begins.
No count-in is used. Sampling starts immediately after you press the pads [1]‒[16] to
sample and then press the [REC] button.
Advertisement
Table of Contents
