Table of Contents
Advertisement
Configuring the Various Settings (UTILITY)
Sending the Audio Input from the INPUT Jack to a Bus
You can set the bus to which the playback audio signals coming into the INPUT jack are sent (meaning which effects
are used).
1
Hold down the [SHIFT] button and press the pad [13].
The UTILITY MENU screen appears.
2
Use the [VALUE] knob to select "EFX SET," and press the [VALUE] knob.
The effect setting screen appears.
From the top screen, you can also make this screen appear by pressing pad [16] while holding down the
[SHIFT] button.
3
Turn the [CTRL 3] knob to select "OTHER."
4
Use the [VALUE] knob to move the cursor to "Input Bus," and press the [VALUE] knob.
The displayed value is highlighted, and you can now edit the Input Bus.
Value
DRY
BUS1, BUS2
5
Use the [VALUE] knob to select the bus, and press the [VALUE] knob.
This confirms the bus to which the input audio is sent.
6
To finish making settings, press the [EXIT] button.
Configuring the Effect Settings (EFX SET)
>
Explanation
The signal is not sent to BUS 1, BUS 2 (the BUS 1 and BUS 2 effects are not used).
The signal is sent to BUS 1 or BUS 2. The effects set for BUS 1 and BUS 2 are used.
Advertisement
Table of Contents
