Roland SP-404MK Reference Manual page 63

2 Hold down the [SHIFT] button and press the [START/END] button.
The marker setting screen appears.
3
Press the pad [1].
The sample plays back.
4
Press the pads [2]‒[16] that are blinking blue, at the timing where you want to add a marker.
This adds the marker to the sample. You can press pads [1]‒[16] to preview the audio at the
corresponding marker.
Automatically adding markers based on conditions (AUTO
MARK function)
You can use the AUTO MARK function to automatically add markers based on certain conditions you specify.
1
Press pads [1]‒[16] to select the sample to which you want to add markers.
2
Hold down the [SHIFT] button and press the [START/END] button.
The marker setting screen appears.
3
Press the [VALUE] knob.
A menu appears.
4
Use the [VALUE] knob to select "AUTO MARK," and press the [VALUE] knob.
The AUTO MARK setting screen appears.
5
Use the [VALUE] knob or [CTRL 2] knob to select a parameter.
Parameter
TIME
DIVISION
LEVEL
TRANSIENT
Value Explanation
2‒16 Adds markers by dividing up the sample equally.
1‒10 Adds a marker at the location in the sample where the levels exceed a
certain value.
HARD, Adds a marker at the location in the sample where there is a large
MID, change in volume, such as when a sound with sharp attack plays.