Table of Contents
Advertisement
Configuring the Various Settings (UTILITY)
Adding Effects to the Overall Sound (BUS 3, BUS 4)
Hereʼs how to apply effects to the overall sound output from this unit.
1
Hold down the [SHIFT] button and press the pad [13].
The UTILITY MENU screen appears.
2
Use the [VALUE] knob to select "EFX SET," and press the [VALUE] knob.
The effect setting screen appears.
From the top screen, you can also make this screen appear by pressing pad [16] while holding down the
[SHIFT] button.
3
Turn the [CTRL 3] knob to select "FAVORITE."
4
Turn the [VALUE] knob to select "FAVORITE 1" through "FAVORITE 16."
The effects you selected in "FAVORITE 1" through "FAVORITE 16" are applied to the overall output audio.
5
To finish making the settings, press the [EXIT] button.
Configuring the Effect Settings (EFX SET)
>
Advertisement
Table of Contents
