Roland SP-404MK Reference Manual page 151

Direct Filter+Drive, Resonator, Sync Delay, Isolator, DJFX Looper, Scatter, Downer, Ha-Dou,
FX1‒Direct Ko-Da-Ma, Zan-Zou, To-Gu-Ro, SBF, Stopper, Tape Echo, TimeCtrlDly, Super Filter,
FX5 WrmSaturator, 303 VinylSim, 404 VinylSim, Cassette Sim, Lo-fi, Reverb, Chorus,
JUNO Chorus, Flanger, Phaser, Wah, Slicer, Tremolo/Pan, Chromatic PS, Hyper-
Reso, Ring Mod, Crusher, Overdrive, Distortion, Equalizer, Compressor
OTHER
Parameter Value
Mute Bus This individually selects the bus to mute with MUTE BUS.
ALL
BUS
Input FX Bypass, Auto Pitch (*), Vocoder (*), Gt Amp Sim (*), Chorus, JUNO
Chorus, Reverb, TimeCtrlDly, Chromatic PS, Downer, WrmSaturator,
303 VinylSim, 404 VinylSim, Cassette Sim, Lo-fi, Equalizer,
Compressor
Effects marked with an (*) are for INPUT FX only.
Input Bus You can set the bus to which the playback audio signals coming into the INPUT jack are sent
(meaning which effects are used).
DRY
BUS1, BUS2
You can
assign the
effects you
like to the
effect
buttons on
the top
panel.
For details
on the
parameters
of each
effect, refer
to "MFX
List".
Explanation
Both BUS 1 and BUS 2 are
muted.
Only the bus selected with
the [BUS FX] button is
muted.
You can apply effects to
the audio thatʼs inputted to
this unit.
For details on the
parameters of each effect,
refer to "MFX List".
The signal is not sent to
BUS 1, BUS 2 (the BUS 1
and BUS 2 effects are not
used).
The signal is sent to BUS 1
or BUS 2. The effects set
for BUS 1 and BUS 2 are
used.